玻璃管避雷器：规格、性能、类型、选择与应用

Glass tube arresters, also known as glass spark gap arresters, are non-linear overvoltage protection devices consisting of a hermetically sealed glass envelope, two metallic electrodes, and an internal discharge gap filled with air or a controlled inert gas mixture. Under normal operating conditions, the gap presents a high impedance that isolates the protected circuit from ground. When a transient overvoltage exceeds the sparkover threshold, the gas ionizes and forms a low-impedance plasma channel, allowing surge current to flow harmlessly to ground while clamping the residual voltage at the equipment terminals.
The construction offers a distinct advantage over polymer or ceramic arresters: the transparent glass envelope enables visual inspection of electrode erosion, internal contamination, and arc-residue accumulation without dismantling the assembly. Glass tube arresters are widely deployed in low-voltage AC power distribution boards, DC rectifier systems, telecommunication base stations, railway signal circuits, and lightning protection modules for instrumentation loops, where their fast response, symmetrical breakdown, and maintenance-friendly design make them a preferred first-stage or second-stage surge protection element.
Typical applications include protection of PLC and SCADA I/O cards, remote terminal units, overhead line insulators for distribution networks, and surge counter modules. Because the discharge mechanism is purely physical, glass tube arresters operate without semiconductor leakage current, preserving signal integrity in high-impedance measurement circuits and providing reliable protection across repeated surge events.

The table below consolidates standard industrial-grade glass tube arrester parameters across common voltage classes.

The borosilicate glass envelope provides exceptional dielectric strength, thermal stability, and resistance to ultraviolet radiation, ensuring that glass tube arresters retain their mechanical integrity after years of outdoor or industrial indoor exposure. Borosilicate glass withstands continuous operating temperatures from −40 °C to +85 °C without dimensional change, and short-duration excursions up to 125 °C do not compromise the metal-glass compression seal.
Copper-tungsten and nickel-plated copper electrodes exhibit high resistance to arc erosion, maintaining consistent sparkover voltage across repeated discharge operations. The hermetic compression seal prevents the ingress of moisture, corrosive gases, and dust, which is critical in high-humidity coastal plants, chemical processing facilities, and paper mills where airborne chlorides and sulfides would otherwise accelerate contact degradation and reduce insulation resistance.
The internal gas fill is chemically inert, so the arrester does not suffer from oxidation inside the envelope. The outer glass surface offers natural corrosion immunity and can be wiped clean during routine maintenance without special solvents. Environmental screening per IEC 60068-2-30 confirms reliable operation under 95% relative humidity at 55 °C, and the devices tolerate salt-spray exposure when installed inside sealed distribution cabinets. However, flame-retardant enclosures and adequate creepage distances remain mandatory in installations with high prospective short-circuit currents.

The following comparison categorizes glass tube arrester families by voltage range, discharge capability, envelope geometry, and target application.

In an electrical protection hierarchy, glass tube arresters function as voltage-limiting spark gaps that provide a low-cost, high-reliability first line of defense against lightning-induced surges, switching transients, and electrostatic discharge events. Their primary function is to hold the protected line at a defined sparkover voltage; once the surge has been conducted to ground and the transient energy dissipates, the arc extinguishes at current zero and the arrester automatically returns to its high-impedance state without manual reset.
In the renewable energy segment, glass tube arresters protect combiner boxes and DC-side inverters of photovoltaic plants by clamping induced-lightning and reverse-polarity surges before they reach expensive power electronics. In rail transportation, they guard axle counter circuits, track circuits, and signaling relays from stray traction currents and atmospheric surges, where any protection failure directly degrades operational safety. Telecommunication infrastructure uses miniature glass tube arresters inside surge protective modules for base station power feeders, antenna lines, and remote radio units, exploiting their low capacitance to avoid signal attenuation.
Process industries integrate glass tube arresters into intrinsic safety barriers and 4–20 mA loop protectors, preventing field transients from damaging PLC analog input cards. Additional deployments include elevator control panels, HVAC building management systems, LED street-lighting drivers, and EV charging station auxiliary supplies, where the arrester extends equipment lifespan and reduces warranty-related downtime.

Selecting a glass tube arrester begins with defining the system continuous operating voltage and the maximum temporary overvoltage the protected equipment can withstand. The arrester DC sparkover voltage must exceed the maximum system voltage including ripple and regulation tolerances, while remaining below the equipment impulse withstand level, typically leaving a 20–30% safety margin on both sides. Engineers must also verify the impulse discharge current rating against the lightning risk level calculated for the specific installation site according to IEC 62305 exposure classes.
For DC circuits, confirm that the chosen sparkover voltage suits the system polarity arrangement, and for AC circuits, verify that both half-cycles are symmetrically clamped. When multiple arresters are used in a cascaded protection scheme, ensure energy coordination between the upstream glass tube arrester and the downstream varistor or TVS diode; this requires verifying the series impedance or adding decoupling inductance to prevent the downstream element from absorbing excessive energy.
During installation, mount the arrester with lead lengths as short as practicable, because every 10 mm of lead inductance adds roughly 8 nH and raises the residual voltage under steep impulse fronts. Use the manufacturer-specified torque for bracket hardware, and never substitute non-conductive washers that compromise grounding continuity. The ground conductor should follow the shortest direct path to the system earth bus, and the arrester must be located on the load side of the main disconnecting means in accordance with NEC Article 280 or IEC 61643-12.
Commissioning requires checking insulation resistance with a 100 V DC megohmmeter, where values below 10⁴ MΩ indicate internal contamination or moisture ingress, verifying sparkover voltage with a calibrated surge generator, and recording baseline values in the maintenance log. Re-testing is recommended after every major lightning season or at intervals not exceeding 12 months. Common installation errors include mounting inside unventilated enclosures where ambient temperature exceeds the rated range, connecting arresters in parallel to increase current capacity, and omitting an external short-circuit protection device rated to interrupt the prospective fault current.

Q: What is the difference between a glass tube arrester and a metal oxide varistor?
A: A glass tube arrester is a spark-gap device that ionizes internal gas to conduct surge current, offering near-zero leakage and very low capacitance. A metal oxide varistor is a semiconductor clamping device that conducts above its varistor voltage, exhibiting higher capacitance and leakage that increases with aging.
Q: How long does a glass tube arrester last in service?
A: Service life depends on the number and magnitude of surge events. Under normal conditions without surges, the hermetic construction provides decades of service. After repeated high-energy discharges, electrode erosion gradually lowers the sparkover voltage, so periodic sparkover testing is recommended to determine replacement needs.
Q: Can a glass tube arrester protect against direct lightning strikes?
A: Glass tube arresters are designed primarily for induced surges and medium-energy transients, not direct lightning strikes. For direct strike exposure, install a class I spark-gap arrester upstream and coordinate the glass tube arrester as a class II or class III protection stage.
Q: What does the sparkover voltage tolerance mean in practice?
A: The ±15% tolerance defines the range within which the actual DC sparkover voltage of a given unit may vary from the nominal value. In coordinated protection schemes, designers must account for this band so the minimum sparkover remains above system voltage and the maximum sparkover stays below equipment withstand levels.
Q: Are glass tube arresters suitable for hazardous area installations?
A: Glass tube arresters are passive components, but suitability for hazardous areas depends on the complete protection assembly and its certification. For explosive atmospheres, use arresters supplied within ATEX or IECEx-certified enclosure systems and verify energy-limiting characteristics conform to the intrinsic safety documentation.
Q: How do I test a glass tube arrester in the field?
A: Use a DC sparkover tester to gradually raise voltage until the gap fires and record the breakdown value. Measure insulation resistance with a 100 V DC megohmmeter. A drop of more than 20% from factory sparkover values indicates wear and justifies replacement.
Q: What happens when a glass tube arrester fails at end of life?
A: End-of-life failure typically results in the internal gas venting through the seal or the glass envelope cracking under sustained fault current. Without an external disconnector, the arrester can short-circuit the line; always coordinate a fuse or thermal disconnector sized to clear the maximum prospective short-circuit current.
Q: Can glass tube arresters be used on both AC and DC circuits?
A: Yes, glass tube arresters are polarity-independent spark gaps and operate identically on AC and DC circuits. Verify that the rated sparkover voltage suits the specific AC RMS or DC bus voltage, and that the impulse discharge current rating meets the application surge environment.
Q: What is the response time of a glass tube arrester?
A: Impulse sparkover time is typically below 100 nanoseconds at a 1 kV/µs rise rate. This fast response protects semiconductor circuits effectively, although multi-stage protection with faster clamping elements is still recommended for highly sensitive electronics.
Q: Do glass tube arresters require maintenance?
A: Maintenance is limited to periodic visual inspection and electrical verification. Because the glass envelope is transparent, technicians can inspect electrode condition without disassembly. Annual sparkover testing and insulation resistance checks are recommended, with additional inspections after severe lightning activity or quarterly in corrosive industrial atmospheres.
Q: What is the maximum continuous operating voltage for glass tube arresters?
A: Standard production ranges extend from 75 V DC up to 3600 V DC. For applications above 3600 V, multiple arresters can be connected in series with voltage-sharing resistors, but a dedicated medium-voltage surge arrester is generally more economical and reliable.

Glass tube arresters deliver reliable, transparent, and low-cost overvoltage protection across low-voltage distribution, telecommunications, renewable energy, and railway signaling systems. Their hermetic borosilicate construction, erosion-resistant electrodes, and fast sparkover response make them an essential coordination element in multi-stage surge protection schemes. Selection requires matching sparkover voltage, impulse discharge current, and environmental ratings to the application, while installation and periodic verification follow standardized engineering practice. For engineers and procurement professionals, glass tube arresters offer a balanced combination of performance, inspectability, and lifecycle economy.